Heads

CFE 14 Degree

Spreadport BBC

The CFE 14 degree Spread-Port head is perhaps the most diverse of any of our Pro Stock style cylinder heads. Available with several different porting programs of both oval and rectangular port design and various valve diameters to accommodate the engine?s bore size. Engine displacements ranging from 430 to 706 c.i.d. have been built using this head. Even with such diversity in combinations all of the CFE 14 degree Spread-Port heads use most of the same assembly components except for pistons due to valve diameter options.

Oval Port Programs designed for smaller displacement engines (under 600 c.i.d.). Applications varying from super-category throttle stop racing to moderate nitrous use.

Square Port Programs designed for large displacement engines (over 600 c.i.d.). CFE fabricated manifold is recommended.

Cylinder Head Specifics

Request More Info
Intake Valve Diameter:As large as 2.480"
Exhaust Valve Diameter:As large as 1.880"
Chamber Volume:82cc @ 4.600 bore
Seats:Available with ductile iron or alloy seats.
Guides:11/32" valve guides are standard, 5/16" guides are available upon request. Alloy guides are standard.
Exhaust Flange:Uses a standard Big Block Chevy header/exhaust flange.
Cooling Provisions:The CFE 14 degree Spreadport head has cooling provisions on the intake flange.

Cylinder Head Requirements

Request More Info
Minimum Bore:4.500" (custom versions are available for bore sizes less than 4.500?)
Intake Manifold:Cast 1x4500 manifolds available for 9.800 and 10.200 deck heights. CFE fabricated manifolds available for various applications.
Exhaust Lifters:Qty 8 @ on-center
Valve Cover:Uses a standard Big Chief valve cover and valve cover gasket.
Shaft Rocker System (required)
Jesel:KPS-21194
T&D:3031
Head Stud Part Number:235-4312
Spark Plug:3/4" reach gasketed spark plug
Assembly Components:Call for details

Additional Press:

    Request More Information About This CFE Product

    Fields marked with an * are required.